Volume 10, Issue 1 (6-2023)                   IJRARE 2023, 10(1): 61-68 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Moradian K, Farzin M, Karevan M, Akbarzadeh S. Assessment and comparing the lubrication quality of solid lubricants made of graphite and MoS2 used for wheel flange/rail gauge corner lubrication by using pin-on-disc tribometer. IJRARE 2023; 10 (1) :61-68
URL: http://ijrare.iust.ac.ir/article-1-323-en.html
Isfahan University of Technology, Isfahan, 84156-83111, Iran
Abstract:   (263 Views)
In light of the widespread application of solid lubricants for wheel flange lubrication and selecting the best composition of these products, three well-known lubricant blocks incorporating 30% graphite, 30% MoS2, and a mixture of 15% graphite and 15% MoS2 have been assessed using a pin-on-disc apparatus at pure sliding conditions. All the specimens, which were encapsulated in an identical thermosetting resin, were evaluated at a sliding speed (V=0.6 m/s) and two different normal loads (F=25, 50 N), followed by representing the results in terms of coefficient of friction graphs, retentivity graphs, and wear rate charts. According to the results, the lubricant which comprised a mixture of graphite and MoS2 was superior to the others, with the reduction of COF by 94%. Following that, the MoS2-based lubricant and graphite-based lubricant diminished COF by 91% and 88%, respectively. 
Full-Text [PDF 277 kb]   (113 Downloads)    
Type of Study: Research | Subject: Rolling Stock

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | International Journal of Railway Research

Designed & Developed by : Yektaweb